• Universal Speedball Monitor Arm 6 Inch
  • Universal Speedball Monitor Arm 6 Inch
  • Cinetoys- MID49 Universal Speedball Monitor Arm (6 Inch) เป็นแขนปรับระดับที่มีสกรูยึด 1/4-20 และ 3/8-16 รวมอยู่ที่ปลายทั้งสองด้าน พร้อมตัวจับบอลคู่สองตัว และส่วนขยาย 6 นิ้ว (150 มม.) พร้อมสายรัดเคเบิลแบบ velcro

MID49 Universal Speedball Monitor Arm (6 Inch)

Brand:
Please, activate Compare option to use this widget.

Shipping calculated at checkout.
Brand: Mid49 Tags: , , Categories:

MID49 Universal Speedball Monitor Arm (6 Inch) เป็นแขนปรับระดับที่มีสกรูยึด 1/4-20 และ 3/8-16 รวมอยู่ที่ปลายทั้งสองด้าน พร้อมตัวจับบอลคู่สองตัว และส่วนขยาย 6 นิ้ว (150 มม.) พร้อมสายรัดเคเบิลแบบ velcro

ปลายบอลแต่ละด้านมีเกลียวยึดมาตรฐานทั้งสองขนาด สามารถกดสกรูภายนอกขนาด 3/8-16 ลงเพื่อเปิดเผยเกลียว 1/4-20 ที่ซ่อนอยู่ด้านใน

ติดตั้งบอลด้วยคันโยกแบบแคมในตำแหน่งลงโดยใช้เพียงแรงมือบิด จากนั้นยกคันโยกขึ้นเพื่อเพิ่มแรงล็อคให้กับชุดประกอบ แรงเพิ่มเติมจากการออกแบบคันโยกแบบแคมช่วยให้แขนล็อคอยู่กับที่โดยไม่ต้องใช้แผ่นยางที่ยุ่งยาก

การออกแบบตัวจับแบบ “Chip Clip” ช่วยให้การติดตั้งง่ายและไม่ยุ่งยาก และสกรูหัวแม่มือแบบเฟืองสามารถดึงออกและปรับตำแหน่งใหม่ได้

แขนขนาด 6 นิ้วมีช่องและรูสำหรับสอดสกรูขนาด 1/4-20 และ 3/8-16 รูขนาดใหญ่สามารถใช้สำหรับการจัดเก็บและจัดระเบียบส่วนขยายแบบซ้อนกันได้

ส่วนประกอบของ Universal Speedball สามารถใช้งานร่วมกับอุปกรณ์ต่อบอลขนาด 1 นิ้ว (25 มม.) ของแบรนด์อื่นๆ เช่น Ultralight Control Systems, Wooden Camera เป็นต้น

น้ำหนักผลิตภัณฑ์: 11.70 ออนซ์ (331 กรัม)

ขนาดผลิตภัณฑ์ (กว้าง x ยาว x สูง): 2.50 x 1.00 x 13.75 นิ้ว (63 x 25 x 349 มม.)

MID49 Universal Speedball Monitor Arm (6 Inch) is an articulating arm with combination 1/4-20 and 3/8-16 mounting screws on each end, two double-ball clamps, and one 6 inch (150mm) extension with velcro cable wrap.

Each ball end contains both mounting thread standards. Push the 3/8-16 outer screw down to reveal the hidden 1/4-20.

Install the ball with the cam-lever in the down position to finger-tight, then lift the lever to add extra locking force to the assembly. The extra force of the cam-lever design allows the arm to lock in place without the use of messy rubber pads.

The “Chip Clip” clamp design allows for easy, annoyance-free installation, and the ratcheting thumbscrew can be pulled out and repositioned.

6 inch arm has pass-through slots and holes for 1/4-20 and 3/8-16 screws. Larger holes can be utilized for nested extension packing and organization.

Universal Speedball components are compatible with any other brand of 1 inch (25mm) ball attachment like Ultralight Control Systems, Wooden Camera, etc.

Product Weight: 11.70oz (331g)
Product Dimensions (WxLxH): 2.50 x 1.00 x 13.75in (63 x 25 x 349mm)

Universal Speedball Monitor Arm 6 Inch MID49 Universal Speedball Moni...